Concentric slave cylinder

This part is a supersession of the following part number: C2S19829.

Suitable for the following vehicles:

X-Type (2.0L Turbo Diesel models)
VIN range: ALL
X-Type (V6 Petrol models)
VIN range: ALL

Note: Not suitable for the 2.2L Diesel model

If you have (or have had) a problem with the starter motor on your Jaguar X-Type you’ve probably got a problem with your Dual Mass Flywheel.

How’s this you ask?

The magnets in the starter motor attract the metal dust from the Dual Mass Flywheel as it wears. Normally the first signs of this are starter motor failure. You may also hear a rattle from the bell-housing of the gearbox if you ‘bleep’ the throttle open.

Replacing the starter motor is only part of the answer and will probably last just 3 months before it fails again (this would not be covered by starter motor warranty).

To do the job properly you should fit the Clutch (JDE4964#), Flywheel (C2S27921) and Slave Cylinder (C2S19829).

We have the OE clutch parts as supplied to the Jaguar assembly lines with huge discounts against the RRP.

If you need to order all of these parts please contact a member of staff via telephone or email as they will be able to offer a bulk order discount.